1.在Mac OS X中安装PHP扩展支持的源码方法
2.FUTU六语言秒合约交易所源码详细搭建教程
3.centos5 源码安装Nginx + mysql + apache + php的方法
在Mac OS X中安装PHP扩展支持的方法
Linux系统中有着许多PHP扩展,不过都需要用户们手动安装后才可以使用,安装一些MAC OS X用户想在自己的源码电脑上安装和使用这些PHP扩展,那么该怎么进行安装呢?下面就和小编一起来看看具体的安装手机期货指标源码安装步骤吧。一起去看看吧!源码安装方法:
安装PHP扩展要求你的安装Mac系统已经安装了Xcode环境和命令行开发工具,如果还没安装,源码请先使用Shell安装。安装
xcode-select --install
为了扩展管理方便,源码首先来安装pecl扩展管理器。安装
cd /usr/lib/php
sudo php install-pear-nozlib.phar
安装Redis、源码贴的溯源码Memcache、安装Mongo等扩展。源码
sudo pecl install redis
sudo pecl install memcache
sudo pecl install mongo
sudo pecl install xdebug
将扩展配置添加的安装php.ini文件中:
extension=memcache.so
extension=mongo.so
extension=redis.so
zend_extension=xdebug.so
安装xcache,从官网下载blogs.com/
3] mhash库
复制代码
代码如下:
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../
4]mcrypt库
注意:因为该库和libmcrypt有依赖性,源码所以在安装前必须知道libmcrypt,app源码和后台否则的话会出现:
错误
复制代码
代码如下:
checking for libmcrypt – version = 2.5.0…
*** ‘libmcrypt-config –version’ returned 2.4.0, but LIBMCRYPT (2.5.8)
*** was found! If libmcrypt-config was correct, then it is best
*** to remove the old version of LIBMCRYPT. You may also be able to fix the error
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is
*** required on your system.
*** If libmcrypt-config was wrong, set the environment variable LIBMCRYPT_CONFIG
*** to point to the correct copy of libmcrypt-config, and remove the file config.cache
*** before re-running configure
configure: error: *** libmcrypt was not found
是因为path的问题,所以执行:
复制代码
代码如下:
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
然后再安装:
复制代码
代码如下:
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../
二、安装mysql
复制代码
代码如下:
/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql xxx
unzip mysql-5.1..zip
cd mysql-5.1./
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables
--with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=innobase
make
make install
make clean
make distclean
chmod +w /usr/local/webserver/mysql
chown -R xxx:mysql /usr/local/webserver/mysql
cp support-files/my-medium.cnf.sh /usr/local/webserver/mysql/my.cnf
cd ../
注意:这里编译./configure命令是一行的而不能有换行符,如果是copy的时候,注意要去处该换行符
在最后一步拷贝的切片分发源码时候,我安装完在support-files下没有my-medium.cnf而只有my-medium.cnf.sh所以将这个文件拷贝过去。
@张宴原文:
附:以下为附加步骤,如果你想在这台服务器上运行MySQL数据库,则执行以下两步。如果你只是同化源码怎么没有希望让PHP支持MySQL扩展库,能够连接其他服务器上的MySQL数据库,那么,以下两步无需执行。
①、以xxx用户帐号的身份建立数据表:
复制代码
代码如下:
/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/usr/local/webserver/mysql/data --user=xxx
②、启动MySQL(最后的表示在后台运行)
复制代码
代码如下:
/bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/usr/local/webserver/mysql/my.cnf
3、编译安装PHP(FastCGI模式)
复制代码
代码如下:
tar zxvf php-5.2.8.tar.gz
gzip -cd php-5.2.8-fpm-0.5..diff.gz | patch -d php-5.2.8 -p1
cd php-5.2.8/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql
--with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib
--with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem
--enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect
--enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap
--with-ldap-sasl
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
注意:这里./configure命令是一行的而不能有换行符,如果是copy的时候,注意要去处该换行符
4、编译安装PHP5扩展模块--可选安装
复制代码
代码如下:
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
make clean
make distclean
cd ../
tar jxvf eaccelerator-0.9.5.3.tar.bz2
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
make clean
make distclean
cd ../
tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
make clean
make distclean
cd ../
tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
make clean
make distclean
cd ../
tar zxvf imagick-2.2.2.tgz
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
make clean
make distclean
cd ../
5、修改php.ini文件
STRONG手工修改:/STRONG查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-/"
并在此行后增加以下几行,然后保存:
extension = "memcache.so"
extension = "pdo_mysql.so"
extension = "imagick.so"
再查找output_buffering = Off
修改为output_buffering = On
6、配置eAccelerator加速PHP:
mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini
按shift+g键跳到配置文件的最末尾,加上以下配置信息:
复制代码
代码如下:
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-/eaccelerator.so"
eaccelerator.shm_size=""
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl=""
eaccelerator.shm_prune_period=""
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
修改配置文件:
vi /etc/sysctl.conf
kernel.shmmax =
然后执行以下命令使配置生效:/sbin/sysctl -p
以下的步骤和张宴步骤中一样配置,不再赘诉